Electrophoresis light recovery device (R / O):
1. Fully automatic operation, high recovery rate, the consumption of electrophoretic paint per ton of electrophoretic material is only about 12 kg.
2. The recovery film of original Japanese special electrophoretic paint is used, and the replacement cycle is as long as 2-3 years.
Equipment parameters:
1) Design basis
a) Production area: 842 ㎡ / hour (1500t / month)
b) Holding capacity: 152l / h
c) Concentration of electrophoretic coating: light, nonvolatile 8%
d) Washing conditions: second washing concentration: less than 0.3%
e) Ro necessary water permeability: 880l / hour
f) Number of RO necessary membranes: 4 inches × 6
g) Operating conditions: Electricity: 25kW pure water: necessary
2) Equipment content and performance parameters:
a) Device type: manual r0-sw-6
b) Water permeability: 880 L / h
C) RO film:
Origin: Japan Toray (strain)
Quantity: 4 inches × 6
Form: su-210s spiral 1010 Φ 100mm × 1000mm
Material: polyamide (polyamide) composite membrane
d) Pressure vessel (module housing)
Specification: 4 inches × 3 PCs, withstand voltage: 40 kg / C ㎡
Material: glass fiber reinforced plastic FRP
E) pump
A. 1 ro supply pump (Grundfos, Denmark)
Multi stage centrifugal type specification: 90L / m × 30maq, power 1.1kw
B. 1 ro high pressure pump (Grundfos, Denmark)
Multi stage centrifugal type specification: 90L / m × 180maq power 4kw
C. 1 through water transfer pump (Grundfos, Denmark)
Multi stage centrifugal type specification: 20L / m × 25maq, power 0.75kw
f) Filter: 1 set
Material: stainless steel 304
Collet filter sleeve: 5
Specification of filter pipe: filtration degree: 3 μ m material: polypropylene (PP)
g) Inspection instrument:
A. 2 pressure gauges 0-6 kg / C ㎡
B. 2 pressure gauges 0-30 kg / C ㎡
C. Contact pressure gauge: 1 set 1-10 kg / C ㎡
D. Contact thermometer: 1 0-100 degrees
E. Meter: through water: 1 2-27l / M Rotameter
F. Concentrated water: 1 10-100l / M metal pipe
G. Conductivity meter: 1 set 0-100ms / cm
H. Level switch: 1 electrode rod type